Vizualogic RoadTrip Elite 8 - Manual (Page 13)

Rear-Seat Entertainment
12
DVD Setup Operation
The following steps 1 to 2 are common to each of
the DVD settings described here. Refer to each
section for details.
1.
Press and hold on the remote control.
The setup menu appears on the monitor.
2.
Press or to select desired setting item
(General Setup Page / Password Setup Page /
Preference Page), then press .
Further items will be displayed.
GENERAL SETUP PAGE
TV DISPLAY / OSD LANGUAGE / SCREEN SAVER /
LAST MEMORY
PASSWORD SETUP PAGE
PASSWORD MODE / PASSWORD
PRFERENCE PAGE
TV TYPE / AUDIO / SUBTITLE / DISC MENU /
PARENTAL / DEFAULT
EXIT SETUP PAGE
3.
Press or to change the setting of further
items, then press .
4.
Press and hold .The settings are stored and
the setup mode is deactivated.
5.
Press or “EXIT SETUP” to return to normal
display.
‧When settings are changed, old settings are
overwritten. Make a note of current settings before
making changes. If the vehicle’s battery is
disconnected, the settings will be cleared and will
return to Factory settings.
SETUP
SETUP
ENTER
General Setup Page
TV display, OSD language, Screen savre and Last-
memory are adjustable.
1.
Press button on the remote control. The
setup menu appears on the monitor.
2.
Press or to select TV DISPLAY /
OSD LANGUAGE / SCREEN SAVER / LAST MEMORY,
then press to confirm a selection.
SETUP
ENTER
‧ Normal / PS (Pan-Scan)
Select this when connected to a conventional 4:3
size monitor. The picture will fill the entire TV
screen. Due to the mismatch in aspect ratio, parts
of the movie at the extreme left and right sides
will not be visible when playing a 16:9 size
movie.
‧ Normal / LB (Letter Box)
Select this when connected to a conventional 4:3
size (normal TV aspect ratio) monitor. There
may be black bands visible at the top and bottom
of the screen when playing a 16:9 size movie.
‧ Wide (16:9)
Select this when connected to a wide screen TV.
This is selected upon shipment from the factory.
Setting TV Display
‧For some discs, the picture may not be set to the
selected screen size.
3.
Press or to select desired screen type.
(default: Wide)
4.
Press to save adjustment.
ENTER
- - General Setup Page - -
TV Display
OSD Lang
Screen Saver
Last Memory
Normal / PS
Normal / LB
Wide
Set TV Display Mode
Wide
ENG
On
On
ENTER
MMD Set up