Vizualogic RoadTrip Elite 8 - Manual (Page 4)

Center Armrest Monitor
3
Placing Discs
‧
place the disc.
‧Your player accepts only one disc at a time for play-
back. Do not attempt to place more than one disc.
‧Playing a disc while driving on a very bumpy road
may result in skips, but this will not scratch the disc
or damage the player.
Damage Discs
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit
and never use any special shaped discs. Use of
special shaped discs may cause damage to the
mechanism.
Correct Handling
‧Do not drop the disc while handling.
‧Hold the disc so you will not leave fingerprints on
the surface.
‧Do not affix tape, paper, or gummed labels to the
disc.
‧Do not write on the disc.
‧Do not touch the surface.
‧Do not expose the disc to direct sunlight.
‧Clean the disc when it is dusty.
‧Make sure that the disc is smooth and flat.
‧Do not use commercially available disc accessories.
Make sure the label side is facing you when you
Please read all safety and operating instructions
in this manual carefully, and keep this manual
for future reference.
Personal Safety
‧
safety belt before operating this monitor.
‧Do not insert the USB while driving.
Failure to do so may result in personal
injury.
Temperature
Do not operate your unit in ambient temperature
above +50°C (+122°F) or below 0°C (+32°F).
Installation
‧Please inquire to your retailing shop to contact the
specialized engineer or technical staff for installation.
‧Be sure to comply with this manual while
connecting the cables. Failure to do so may result in
damage to the product.
‧Be sure the stability of the signal cable while installing.
Failure to do so may cause fire or electric shock due to
the wear of the signal cable.
‧Be sure to collect the cables well after installation.
Failure to do so may cause fire or electric shock.
Maintenance
If you have problems, do not attempt to repair the unit by
yourself. Doing so may result in personal injury or damage
to the product. Return it to your retailing shop for repairing.
Characteristics of LCD Panel
‧After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
‧Under cold temperature conditions, the screen may
lose contrast temporarily. After a short warm-up period,
it will return to normal.
‧The LCD panel is manufactured using an extremely
high precision manufacturing technology. Its effective
pixel ratio is over 99.99%. This means that 0.01% of the
pixels could be either always ON or OFF.
Using the remote control
‧Point the remote control at the remote sensors within 2
meters.
‧It may not be possible to operate the remote control if
the remote control sensor is exposed to direct sunlight
or interfere with objects.
Product Cleaning
Use a soft dry cloth for periodic cleaning of the
product. For more severe stains, please dampen the
cloth with water only. Anything else has the chance of
dissolving the paint or damaging the plastic.
The back seat passenger must tie the
PRECAUTIONS
CORRECT INCORRECT
Operating Ins truc tions
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc
could cause the player to skip. For routine cleaning,
wipe the playing surface with a clean, soft cloth
from the center of the disc to the outer edge. If the
surface is heavily soiled, dampen a clean, soft cloth
in a solution of mild neutral detergent before
cleaning the disc.