Vizualogic RoadTrip Elite 9 - Manual (Page 8)

7
Ba sic Operations
Turning Power ON/ OFF
1.
Press to turn ON.
2.
To turn off the power, press and hold again.
Loading Discs/ Unloading Discs
Turn on the power before loading and unloading discs.
‧Be sure to switch to DVD soure, before loading and
unloading discs.
Loading Discs
Insert the disc with the label side facing you.
Once the disc is partially inserted, it is drawn in
automatically. Playback starts.
inserted when the power is OFF.
If wrong disc, upside-down disc or dirty disc have
been inserted. ”NO DISC” is displayed.
Unloading Discs
Press to eject the disc.
Be sure to remove the disc.
‧If the ignition key is set to ACC or ON, a disc cannot
be removed when the power is OFF.
‧During ACC OFF or while the disc is being loaded
(”READ” is displayed) the disc will not be ejected
even if you press” EJECT”.
‧If the ignition key is on ACC or ON, a disc cannot be
‧
Switching the Source
Front Control Keys
1.
Press “SRC” to cycle through the different sources.
Remote Control
1.
Press “Source” to cycle through the different sources.
‧OSD (On Screen Display) will be turned off
automatically, when not operating more than 10
seconds.
‧When you proceed the above step with front control
keys or remote control, the device source name on
OSD can be automatically shifted.
DVD AV 1 AV 2
DVD AV 1 AV 2
FM/IR (On/Off)
FM ON/OFF (default: OFF)
1.
Press FM/IR once: To turn ON/OFF the FM
transmitter.
2.
When you turn on the FM, press or to select
desired FM frequency 87.7MHz ~ 89.9MHz or OFF.
IR ON/OFF (default: IR A)
1.
Press FM/IR twice: To turn CH A / CH B or Off the IR.
2.
When you turn on the IR, press or to select
CH A, CH B or Off.
‧The wireless headphone uses the infrared ray (IR) to
transmit, if there are obstacles among the transmitter
and headphone, it may have some noise.
‧When open the 2 sets of screen, please set the IR for
the individual CH A or CH B, to prevent mutual
interference.
SPEAKER ON/OFF (Option)
1.
Press FM/IR third: To turn ON/OFF the Speaker.
2.
When you turn on the speaker, press or to
select ON or OFF.
(default: OFF)