Vexilar LC-10 - Manual (Page 14)

TEMP ADJ
Press the MENU button and then the ALARM button
to enter the TEMP ADJ settings. This page allows you to
adjust or calibrate the temperature reading if you have the
optional temperature probe installed on your LC-10.
Pressing the LIGHT button will decrease the read temper-
ature by one tenth of a degree each time you press it.
Pressing the FISH ID button will increase the reading.
RESET
Press the MENU button and then the EXP. button to
enter the system reset setting. RESET returns all setting
back to the factory original settings. Press the FISH ID but-
ton to reset the system. Use this feature to trouble shoot
problems or to get back to a "known" state .
RESUME
While in any menu page, press the MENU button to
return back to the normal view.
SIMULATOR
There is a built-in simulator that will allow you to oper-
ate the LC-10 without being on the water. To activate it,
turn the unit off. Then, press the ON/OFF button and hold
it until you hear a second set of beeps. You can then let go
and the simulator will start.
14