VACUUBRAND VNC 2 - Manual (Page 10)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999161 / 27/03/2012
page 10 of 45
people from the effects of dangerous substances if contamination has occurred.
Use appropriate protective clothing, safety goggles and protective gloves.
☞ Before starting maintenance vent the vacuum controller and isolate the it from
the vacuum system.
Ensure that maintenance is done only by suitably trained and supervised techni-
cians. Ensure that the maintenance technician is familiar with the safety procedures,
which relate to the products processed in the vacuum system.
Interior components of the controller can only be repaired at the factory.
In order to comply with law (occupational, health and safety regulations, safety at
work law and regulations for environmental protection) vacuum pumps, components
and measuring instruments returned to the manufacturer can be repaired only when
certain procedures (see section „Notes on return to the factory“, pg. 42) are fol-
lowed.
NOTICE