Bin control thermostat – Twin Eagles AM-50BAE-AD User Manual
Page 49

49
U1VA6060209
11. Bin Control Thermostat
1) Unplug the icemaker or disconnect the power source.
2) Remove the top panel, door and pipe cover (rear).
3) Remove the thermostat holder from the storage bin, and disconnect the the bin control
thermostat bulb.
4) Remove the bin control thermostat from the icemaker body (rear).
5) Cut off heater wires and splice new heater wires.
6) Install the new bin control thermostat in the reverse order of the removal procedure.
7) Refit the panels in their correct positions.
8) Plug in the icemaker or connect the power source.
This manual is related to the following products: