Triner Scale 1200g High Precision - Manual (Page 16)

User’s Guide | 1200g
14
Error Codes
ERROR CODE DESCRIPTION CAUSES
Err 3
Calibration weight
error. Attempt to calibrate
with incorrect
calibration weight.
Err 4 Initial Zero is
greater than
allowed (4% of
maximum
capacity) when
power is
turned on or
when the
ZERO/ENTER
key is pressed.
Weight on the pan
when turning the
scale on.
Excessive weight on
the pan when
zeroing the scale.
Improper calibration
of the scale.
Damaged load cell.
Damaged
Electronics.
Err 5 Keyboard Error.
Improper operation of
the scale.
Err 6 A/D count is not
correct when
turning the scale
on. Platform not installed.
Load cell damaged.
Electronics damaged.
Err 17 Unstable Mode. Key pressed before
scale is stable
(wait for stable
icon ).