Triner Scale 1200g High Precision - Manual (Page 15)

User’s Guide | 1200g
13
OUTPUT TO A REMOTE DISPLAY
To send the weight information from the CZ 1200 to
a remote display:
1) Connect the scale to the remote display
using a standard DB9 null modem cable.
2) Access the Technical Parameters of the
CZ 1200 scale (see the previous section
“Adjusting the Parameters”).
3) Navigate to the P2 Con parameter.
4) Press ENTER. Press MODE to select S
232 or S USb as required, based on the
connection.
5) Press ENTER. Press MODE to navigate
to P Cnt.
6) Press ENTER. Press MODE to navigate
to 9600 baud rate, or other rate if
required by remote display device.