Triner Scale 1200g High Precision - Manual (Page 12)

User’s Guide | 1200g
10
PARAMETER DESCRIPTION
P2 Con COMMUNICATION
SELECT RS-232 TYPE
S 232 = RS-232, S USB = USB interface
SELECT OUTPUT MODE
P prt = Connect with mini printer
P cont = Connect with remote display or PC
P auto = Connect with mini printer, auto print
(auto accumulation)
SELECT BAUD RATE
After you select communication mode, display
will show b xxxx, this is baud rate, you can select
from 600/1200/2400/4800/9600bps
SELECT PRINTER OUTPUT MODE
If you select P prt or P auto (for printer), after
setting baud rate, the display will show tp or LP-
50. This is printer mode, you can select normal
mini printer (TP) or label printer (LP-50).
If you select LP-50, display will show ENG or
CHI, this is print out language. Select ENG.
P3 Cnt
This display will show xxxxxx for indicating the
internal counts.
Press PRINT key to escape.
P4 Atn This option is used to select the auto zero.
Options : 0.2e, 0.4e.
P5 CAP Sets the capacity.
CAUTION:
FOR SCALE TECHNICIAN USE ONLY!