Trending Accessibility Adjustable fusion shower pan surface mounted on concrete - Manual (Page 9)

Installation Guide
www.trendingaccessibility.com [email protected]
9
for adjustable fusion shower pan surface mounted on concrete
Step 22
Begin the application of the liquid waterproofing
membrane. Paint a layer of liquid waterproofing
over all taped joints. It is easiest to begin with the
walls first and then proceed to the floor area. For
consistant application, use a paint roller to apply
waterproofing to all surfaces. After first coat is dry,
re-coat.
Step 21
Now attach the clamping ring. Apply solvent
cement to inside of clamping ring. Press firmly into
position and allow the solvent to set.
NOTE: Do not allow the solvent cement to come
into contact with the membrane
Gasket Clamp
Drain Adapter Flange
Gasket Membrane
Step 23
Apply two coats of liquid waterproofing to achieve
2 mils. (roughly the thickness of a credit card)
Make sure that the “V” section of the gasket clamp
is filled with the liquid waterproofing.
Best Practice
To achieve the best results, we recommend
waterproofing the whole room.