Toa C-CH210FH - Manual (Page 12)

12
MAIN POWER FUSE 1 A
24 V AC
1 2
24 V AC
1 2
HOUSING POWER MAIN POWER ± 6 V DC
FOCUS ZOOM COM UP DOWN RIGHT LEFT AUTO CAMERA COM COM WIPER DEF ON-AC IRIS
MAIN POWER 24 V DC HOUSING POWER 24 V AC
REMOTE CONTROL UNIT
model CC-5011B
HOUSING
POWER
MAIN
POWER
CAMERA 2
1 2
CAMERA 3
1 2
CAMERA 1
1 2
1 2 1 2
CC-5941B 24 VAC Adapter
CC-5011B Direct Control System Remote Controller* 2
To Camera Drive Unit’s
CAMERA IN terminal
Junction circuit board terminal block (B)
Junction circuit board terminal block (A)
Note
Take care not to connect the AC input to the video output.
If connected by mistake, the camera will fail.
13 VIDEO OUT
VIDEO OUT
12 VIDEO GND
VIDEO GND
10 ZOOM
9 FOCUS
8 IRIS
7 LENS COM
6 NC
11 NC
5 WIPER
4 DEF
3 CAMERA POWER
CAMERA POWER
2 AC HOT
1 AC COM
Note
Note correct polarity when connecting the dedicated AC adapter.
Reversed polarity connections will cause damage to equipment.
6-core cable* 1
C-CH210FH
8. CONNECTION EXAMPLES
8.1. Connections to the CC-5011B Direct Control System Remote Controller
8.1.1. When connecting the C-CH210FH directly to the CC-5011B:
* 1 Use cables with diameter of over 1 mm when connecting the CC-5941B to the CC-5011B.
* 2 For how to mount the C-5011B, refer to its instruction manual.