Toa C-CH210FH - Manual (Page 11)

11
20
15 5
10 20
15 5
7.4. Coaxial Cable End Processing
Process the coaxial cable end as follows:
3C-2V Cable
1. Strip the cable sheath 20 mm from the cable end.
2. Bend back braided copper shields over the cable sheath, then remove
the insulating material 15 mm from the cable end.
5C-2V Cable
1. Strip the cable sheath 30 mm from the cable end, and braided copper
shields 20 mm.
2. Remove the insulating material 15 mm from the cable end.