Toa RM-1200 - Manual (Page 5)

5
2. GENERAL DESCRIPTION
TOA's RM-1200 is a general-purpose remote control unit designed to be used in conjunction with TOA's FS-
971 Series Rack Mounted Emergency PA Systems. Featuring a built-in chime unit, the RM-1200 permits
group broadcast of up to 20 groups, simultaneous all-zone broadcast, and individual zone broadcast of up to
330 zones. First-in-first-out or Last-in-first-out priority can be assigned to individual units when connecting
multiple remote control units.
3. FEATURES
• Liquid crystal display facilitates check of broadcasting status, and initial setting.
• Individual zone broadcast of up to 330 zones (FS-971 Series).
• Uni-directional microphone suited for announcements.
• AUX input jack permits connection of a cassette deck or CD player.
• Internal compressor circuit prevents sound distortion due to large input.
(Functional only when the microphone is used.)
• Can be mounted on a wall.
4. HANDLING PRECAUTIONS
• Use the unit only with the voltage specified on the junction panel to which the unit is connected. Using a
voltage higher than that which is specified may result in equipment failure.
• To clean, wipe with a dry, soft cloth. Do not use benzine, thinner or chemically-processed towel because the
unit may be deformed or its finish discolored.
• When the case or operation panel is dirty, lightly wipe it down with a soft cloth. When it gets very dirty, wipe it
down with a wrung towel after dipping it in a neutral detergent diluted with water, then wipe with a dry cloth.
• Do not spray an insecticide or other volatile liquids over the unit. Avoid leaving the unit in contact with the
rubber or vinyl products for long hours because its quality may deteriorate or paint peel off.