Toa RM-1200 - Manual (Page 14)

14
8.3. Usable Group Numbers
Press either the [1] or [2] key to select group numbers used.
Note
If [1. 10] is selected, only up to ten groups of A1-A0 can be used.
The A/B key cannot be used.
Pressing the REGISTRATION key stores the selected group
numbers and displays the Individual Zone screen.
8.4. Individual Zone Broadcast
Press either the [1] or [2] key to set whether or not to disable (ON
or OFF) the Individual Zone Broadcast Function.
Note
If [2. OFF] (disabled) is selected, the INDIVIDUAL ZONE key
cannot be used.
Pressing the REGISTRATION key stores the setting and displays
the Chime type screen.
8.5. Chime Tone Type
Using the [1]-[5] keys, select the chime tone type to be played.
[1]: 4-tone chime
[2]: Two-tone chime
[3]: Single-tone chime
[4]: None
[5]: External chime
Note
The external chime refers to a chime component installed in
equipment connected to the RM-1200. Selecting [5. External
Chime] disables the Auto Chime Function.
Pressing the REGISTRATION key stores the selected chime tone
type and displays the Auto Chime screen.
If the [2] key is pressed, this indication is
displayed.
G r o p N o . S e t u u 2 p
1 . 1 2 . 2 0 0
G r o p N o . S e t u u 1 p
1 . 1 2 . 2 0 0
If the [2] key is pressed, this indication is
displayed.
I n d v i d u a l Z o n i 2 e
1 . O 2 . O F F N
I n d v i d u a l Z o n i 1 e
1 . O 2 . O F F N
If the [5] key is pressed, this indication is
displayed.
C h i e t y p e m 5
1 5
C h i e t y p e m 1
1 5