Toa RM-1200 - Manual (Page 15)

15
8.6. Auto Chime Function
The Auto Chime Function automatically sounds a chime when the TALK
key turns on and off. However, if [5. External Chime] is selected in
5. Chime Tone Type Setting, the Auto Chime Function is disabled.
Using the [0]-[4] keys, set the operation mode.
[0]: Disables the Auto Chime Function.
[1]: TALK key ON → Ascending 4-note chime → Microphone turns on.
OFF → Microphone turns off. → Descending 4-note chime (*1)
[2]: TALK key ON → Ascending 4-tone chime → Microphone turns on.
OFF → Microphone turns off. → Announcement is terminated (*2).
[3]: TALK key ON → Designated chime tone → Microphone turns on.
OFF → Microphone turns off. (*1)
[4]: TALK key ON → Designated chime tone → Microphone turns on.
OFF → Microphone turns off. → Announcement is terminated (*2).
Further pressing the REGISTRATION key stores the designated Auto
Chime mode and displays the message "Store?".
8.7. Set Data Registration
To operate the unit exactly as set in Items 8.1.-8.6. above, select
[1. Yes], then press the REGISTRATION key. The termination message
is displayed.
To change set data, press the [2] key to select [2. No], then press the
REGISTRATION key. The display returns to the Initial Setup screen.
Make changes by following the procedures 8.1.-8.6.
8.8. Termination of the Setting
Set the Setting Mode Switch to the OFF position.
The setting is now complete. The display returns to the normal screen,
indicating that the unit is in normal operation mode.
S e t S e t u p S W . 1
t o O F F " "
Termination message
S t o e ? r 1
1 . Y s 2 . N o e
Set data registration
A u t c h i m e o 0
0 . O F 1 4 F
Corresponding mode number
appears as the key is pressed.
A
Setting Mode Switch
Notes on operation
(*1) Press the RESET key to terminate announcements.
(*2) Announcements are automatically terminated.