Portable gas grill ( ), Assembly instructions 2, Chapter – Vermont Casting VC0620P User Manual

Page 9

Getting Started

Unpacking the Grill Parts

Liquid Propane Models

Natural Gas Models

1. Please follow the steps in the order that

they are presented.

2. Assemble the grill where you plan to use it.
3. You may want to place an old towel or

cloth at the assembly site to prevent nuts and
bolts from becoming lost.

4. Have a friend help. An assistant can make

the assembly easier by holding the parts in
place while you fasten the nuts and bolts.

5. To be ready to barbecue immediately, have

the L.P. gas cylinder filled by an authorized
L.P. dealer or cylinder exchange center.

1. Remove and set aside all inner boxes and

parts from the master carton.

2. Remove and set aside all wrapping paper

and additional packaging from the parts.

3. Do not destroy carton or packing until your

grill is completely assembled and operating to
your satisfaction.

If a L.P. gas cylinder has been included with

your L.P. gas grill, it has been shipped empty
for safety reasons. To be ready to grill
immediately, please have the fuel cylinder
filled with L.P. gas by an authorized L.P. gas
dealer. Some L.P. gas grill models do not
include a L.P. gas cylinder.

Natural gas grills require a connection to a

natural gas supply. The gas connection should
be made only by a qualified installer or a
licensed plumber. The gas supply line must
not be installed by the consumer.

Assembly Instructions

Chapter

3/8

7/16

flat-head screwdriver

7/16” open-end wrench*
*

Tools needed to assemble grill:

A socket set or an adjustable

of the open-end wrenches.

wrench may be used in place

phillips-head screwdriver

3/8” open-end wrench*

(For side burner equipped grills)

Note: You may notice during assembly that hardware

bag “B” is used before hardware bag “A”. The
assembly procedure has been improved from the
original sequence to make assembly easier. However,
hardware packaging has not been changed.