Vermont Casting VC0620P User Manual
Page 13
(The control valve ends
are attached to the pillar; the
burner tubes are attached and
extend through the grill bottom.)
4.
13
Assembly Step 3 - Continued
Improper installation and
connection of the burner tubes to
the control valves is dangerous
and may lead to damaging fire
and personal injury.
This illustration shows a proper
connection.
Locate the two black igniter
wires beneath the grill bottom.
Press the metal contacts of
the loose ends of the wires
onto the metal pins of the
igniter unit. The position of the
wires is not relevant - either
wire may be connected to
either prong. It is important
that the wires are connected
securely.
Venturi
Valve
IMPORTANT: Make sure the
control valve ends are properly
seated inside the burner tubes as
shown.