Vermont Casting VC0620P - Manual (Page 16)

16
Assembly Step 5 - continued
5 5
3 3
4 4
5.
6.
7.
8.
9.
10.
11.
12.
Hold the lid to align the hinge holes.
Insert a hinge pin through the hinge hole
in the lid and into the hole in the bottom
hinge strut.
After the hinge pin is in place, insert a
hair pin through the hole of the hinge pin
to secure it.
HINT: There is an air space between the
back of the lid and the grill bottom where
you can install the pins.
Repeat for the
opposite side.
Raise the lid to attach
the front handle.
Attach one handle
standoff to the front
of the grill lid, as shown.
Insert one end of the handle into the
hole of the mounted standoff.
Place the other standoff onto the handle,
and while holding the handle in place,
assemble the opposite standoff to the lid
in the same manner.
standoff
standoff
gasket
grill lid