Toa ER-1000 WR - Manual (Page 6)

6
6. BATTERY REPLACEMENT
AA-type alkaline (LR6), black manganese (R6PU) or nickel-metal hydride (HR15/51) batteries
can be used to power the product. Please use only a single type of battery.
Notes
• Batteries are not included. Please purchase separately.
• Explanatory diagrams for Steps 2 to 4 omit the Belt.
Step 1. Loosen the Belt to permit the Battery Cover
to be opened or closed.
Since the battery storage space is
concealed beneath the Belt, loosen the belt
in the direction indicated by the arrow.
Step 2. Shift the Lock Lever in the directions indicated
by the arrow and unlock the Battery Cover to
remove it.
Steps (1) and (2) must be carried out in order.
Belt
Battery Cover
Lock Lever
Battery Cover
(1)
(2)
Coin
Lock Lever
Battery Cover
When the Battery Cover is Hard to Remove:
The Battery Cover is made with a lock to prevent it from being inadvertently opened.
If batteries are not inserted properly and the Battery Cover is forced into place, or some
sort of impact causes the batteries to rise out of place, it may lead the Battery Cover to
become distorted and difficult to remove.
When the Battery Cover is difficult to remove, press down on the center of the Battery
Cover to put it back in its proper shape. Using an object such as a coin will make it easier
to open.
[Using a coin to remove the battery cover]
Step 1. Insert the coin into the Battery Cover’s
Lock Lever.
Step 2. Firmly push the coin into the Lock Lever
and then raise the Battery Cover.