Summary, Serial port setting, Command configuration – Toa 9000M2 Series Ver.200A User Manual
Page 2: Transmission data after command reception, Control command and setting value, Channel name request, Speaker preset setting, Anc adjust, Command list, Communication examples
Page 2 of 33
TABLE
OF
CONTENTS
Page#
1.
SUMMARY ........................................................................................... 3
2.
SERIAL PORT SETTING ..................................................................... 4
3.
COMMAND CONFIGURATION............................................................ 4
4.
TRANSMISSION DATA AFTER COMMAND RECEPTION.................. 4
5.
CONTROL COMMAND AND SETTING VALUE .................................. 5
5.1.
Channel Fader Gain.............................................................................................5
5.1.1.
Channel Fader Gain - Position setting........................................................5
5.1.2.
Channel Fader Gain(Paging Output Volume) - Position setting ...............7
5.1.3.
Channel Fader Gain - Step Up/ Step Down ................................................9
5.2.
Crosspoint Gain................................................................................................. 11
5.3.
Preset Memory Recall .......................................................................................13
5.4.
Channel ON/OFF................................................................................................14
5.5.
Power ON/OFF ...................................................................................................14
5.6.
Tone Control ......................................................................................................15
5.7.
EQ Settings ........................................................................................................17
5.8.
Loudness Compensation Settings...................................................................19
5.9.
Filter Settings.....................................................................................................20
5.10.
Input Sensitivity Setting....................................................................................21
5.11.
Phantom Power ON/OFF Setting......................................................................22
5.12.
Paging Event Preset Recall ..............................................................................23
6.
Channel Name Request.................................................................... 24
7.
Speaker Preset Setting..................................................................... 25
8.
ANC ADJUST .................................................................................... 26
8.1.
ANC Adjust Setting............................................................................................26
8.2.
ANC Get Reference ...........................................................................................28
9.
COMMAND LIST................................................................................ 30
10.
COMMUNICATION EXAMPLES ........................................................ 32