Clarion HX-D2 - Manual (Page 17)

HX-D2
21
English
Operations Common to Each Mode
Adjusting P.EQ
●About P.EQ (Parametric Equalizer)
This function allows you to correct in detail all
frequency levels by a smooth curve by correcting
frequencies matched to the type of your car.
∗ This can be adjusted when the Equalizer mode is
set to "P.EQ".
∗ This can be adjusted when the Audio mode is the
Standard mode or the Multi mode.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select
"SOUND".
3. Press the [ s] button.
4. Press the [ ] or [ ] button to select "P.EQ".
5. Press the [ ] button.
6. Press the [ ] or [ ] button to select the
adjustment item.
∗ Pressing the [ROTARY] knob while the L/R channel
is selected turns the mute function of the selected
channel ON/OFF.
Each press of the button switches the setting as
follows.
P.EQ ON/OFF: ON/OFF
P.EQ LEFT/RIGHT: Left channel/Right channel
BAND: band (1 to 5)
fo: frequency (BAND 1,2,3 : 50 Hz to 20 kHz)
G: gain (-12 dB to +12 dB)
Q: Q-curve (0.5 to 12.0)
C: copy
(BAND 4,5 : 630 Hz to 20 kHz)
7. Press the [ s] button. The setting value
blinks.
8. Press the [ ] or [ ] button to adjust the
setting.
9. When you have finished the adjustment,
press the [ s] button to return to the
screen in step 6. This sets the setting value.
10.Repeat steps 6 to 9 to adjust each of the
adjustment items.
11.Press the [ADJ] button to return to the
previous mode.