Toa FS-7000 SERIES Manual - Manual (Page 28)

28
8.2. Making Announcements from the FS-7000RM
[Keys used for operation]
Microphone
All-Zone Call Indicator
Zone Selection
Indicators
All-Zone Call Key
Chime Key
Busy Indicator
Broadcast Reset Key
Talk Key
Zone Selector Keys
[FS-7000RM] [FS-7010RM]
Step 1. Press the appropriate Zone selector keys or All-zone call key on the FS-7000RM or FS-7010RM to
select the desired broadcast areas.
The appropriate Zone indicators or All-zone indicator will illuminate.
Step 2. If the Busy indicator is illuminated green, press the Chime button to sound the chime.
If the Busy indicator is illuminated orange, then another higher-priority broadcast is in progress, and
broadcasts cannot be made from the FS-7000RM.
Wait until the higher-priority broadcast is finished and try again.
Step 3. Press the Talk key continuously and make the announcement using the microphone. The
announcement is broadcast only while the Talk key is depressed.
Note
If a higher-priority broadcast is made while the announcement from the FS-7000RM is underway, then
the In-Use indicator will illuminate orange and the announcement will be suspended. In such cases,
simply wait until the higher-priority broadcast is finished and try again.
Tip
It is possible to change the Talk key from "PTT" (Press-to-Talk) operation (which allows the user to
speak only while the key is continuously pressed) to "Alternate" operation (which alternates the
microphone between ON and OFF with each press of the key).
(For changing the key operation, refer to the separate Installation Manual.)
Step 4. Press the Broadcast reset key to finish broadcasting.