Canon DR-1210C - Manual (Page 67)

Appendices 63
Ch
ap
te
r 3
2.
Press down on the separation pad until it clicks in place, and make sure that it
is locked.
3.
Attach the roller unit by following steps c and d below.
c: Align the pin on the roller unit shaft with the notch on the scanner side and
insert it.
d: Set the lock lever in place with the lever pointing upwards.
4.
Push the roller unit lock lever down to lock the roller unit into place.
DR-1210C.book Page 63 Monday, December 19, 2005 10:35 AM