TeeJet FieldPilot Install Case MX Magnum w/Factory Valve - Manual (Page 8)

www.teejet.com
8
FieldPilot ®
2. INSTALL STEERINg DISENgAgE SwITCh (KIT 91-07011)
The steering disengage kit (L) is used to automatically disengage FieldPilot when the steering wheel is
turned. The magnets mount on the steering shaft or other rotating part of the steering wheel and the sensor
mounts so that there is a 1/8″ clearance between the sensor and magnet. One option is to remove the
cowling around the steering column. Drill a hole as indicated and mount the sensor inside the cowling.
Usually three or four magnets are adequate.
Figure 1-3: Install Steering Disengage Switch (Kit 91-07011)
Hole
drilled