TeeJet LH INTELLITRAM 500 - Manual (Page 2)

020-506-UK LH I NTELITRAM 500 M INI MANUAL V ERSION 1
FIXED KEYS
Key Description
HOLD KEY
Pressing this key stops the bout number from being counted. The implement can
be lifted without the bout number changing. This function is typically used if the
seed drill must be raised for an obstruction. Once the obstruction has been
cleared, press the HOLD key again and the bout number will be counted
automatically again. When this function is active an icon will be displayed on the
screen.
FUNCTION SELECTION KEY
Pressing this key pages through the available operating functions. An operating
function is automatically selected – it is not necessary to press other keys to
accept the selected function.
Menu
MENU KEY
The computer alternates between the operating screen and the main menu each
time this key is pressed. The key has a toggle function so if the operating screen
is shown and the key is pressed the main menu will be displayed instead and visa
versa. If the key is pressed whilst, e.g. encoding, the operating screen will be
displayed.
SELECTABLE FUNCTIONS
Key Description
SPEED
The present forward speed shown in kilometres per hour.
AREA
The worked area since the last reset, displayed in ha. The area counter is shown
with 2 decimals until 99.99 ha. The area counter is shown with 1 decimal
thereafter until 999.9 ha. Area is displayed with no decimals thereafter.
HA/HOUR
The present working efficiency shown as ha/hour.
TIME
The current time.
KG COUNTER
The amount sown since the last reset. The amount is shown in kg until 9999 kg
and then as tons (99.99, 999.9, 9999). When the amount counted changes from
kg to ton this is indicated on the display with a “T” in the weight icon.
KG LEFT
The amount remaining in the seed hopper (presupposes that the amount filled
into the hopper has been encoded).
KG/HA
The present seed rate shown as kg/ha.
DISTANCE
The driven distance since the last reset. The distance driven is shown as metres
up to 9999 m, thereafter as km (99.99, 999.9, 9999). When the distance counter
changes to km the icon changes to show “km” instead of “m”.
RPM FAN
Only displayed if pneumatic seed drill has been selected under machine type in
the system menu.
The fan speed shown as RPM.