TechniSat DIGIT ISIO S - Manual (Page 34)

> You can, for example, select +1 hour for which the receiver should continue to record
the channel and then automatically stop recording.
9.2 Timer recordings
You can use the DVR timer to record programmes to an attached recording medium while
you are out. Your receiver is equipped with video recorder timers and channel-switching
timers. In terms of their programming, these timer types differ only in name. You can
programme the timers manually as described in this chapter, or use the EPG/SFI function.
9.3 DVR playback
You can access DVR recordings via the DVR Navigator.
9.3.1 Calling up the DVR Navigator / Starting DVR playback
The DVR Navigator can be called up in the following ways. Depending on whether you
are in TV or radio mode, a list appears with all the TV or radio recordings present on an
attached USB storage medium, eSATA hard disk or inserted SD/MMC card.
The broadcast information can be displayed and hidden by repeatedly pressing the
Info button.
> You can start to play back a recording by highlighting it and confirming with OK.
9.3.1.1 When in TV mode
> In TV mode press the Stop / DVR button to directly switch to the DVR Navigator.
Or
>
Open the programme lists navigator by pressing the OK button and switch to the DVR
Navigator by pressing the Stop/DVR button.
Or
>
In the function selection select the Movies / DVR item.
> Now call up the My Recordings folder on your attached recording medium.
34