TechniSat DIGIT ISIO S - Manual (Page 15)

15
Channel search / ISIPRO
(where available)
You have various options for searching for new channels or updating the channel list. You
can use the ISIPRO channel list function to download a new channel list for your receiver
from the satellite or run a channel search.
>
To download an up-to-date channel list, use the up/down arrow keys to highlight
the ISIPRO - service list update item.
> To download the available current channel list, use the up/down arrow keys to
highlight the ISIPRO - service list update item and start the process by pressing
the OK button.
The current channel list will now be downloaded via satellite. Please observe
subsequent screen displays and notes.
> If you want to run a channel search via satellite instead of updating the channel list,
or if the DVB-S reception signal has not been configured, use the up/down arrow
keys to highlight the All channels or All unencrypted channels field, then
start the channel search process by pressing the OK button.
In this search, all selected satellites in the antenna configuration are automatically
scanned for channels. This procedure may take several minutes. Please take note of
note all messages displayed on the screen.
If the channel search/channel list update has been skipped, the default channel list is loaded.
Loading EPG/SFI data
Your digital receiver has the EPG/SFI ( EPG = Electronic Programme Guide) electronic
programme guide. You must first get the receiver to download the EPG/SFI data from the
satellite to enable electronic programme guide data to be displayed.
For this reason, the receiver will automatically start downloading the EPG/SFI data after the
channel list update or channel search is completed. This process can take up to 30 minutes.