TechniSat DIGIT ISIO S - Manual (Page 19)

> By highlighting Accept using the right/left arrow keys and confirming with the
OK button or by pressing on the green function key (Accept), the changes are
saved and you return to the next menu level up.
Alternatively:
>
Press the Back button.
A request appears asking whether the changes you made should be applied.
> Using the right/left arrow keys highlight Yes or No and confirm your selection by
pressing the OK button.
Changes will now be saved or discarded according to your selection and you return to
the next menu level up.
Alternatively:
>
Press the Menu button to leave the menu directly.
The settings that need to be saved manually will be reset in this case.
If the green function key with Accept is not displayed in the bottom line of the
screen, the changes are saved automatically when leaving the menu.
7.4 Changing a setting
You can create settings using the arrow selection method, the selection list, by
entering numbers and by using the virtual keyboard. The device dictates the method
that can be used to alter a highlighted setting. You can see this from the following displayed
symbols:
-
Arrow selection method (Point 7.4.1)
Arrows are shown on the left or right edge of the highlight.
- Selection list (Point 7.4.2)
The symbol is shown on the right edge of the highlight.
- Entering numbers (Point 7.4.3)
- Virtual keyboard (Point 7.4.4)
The symbol is shown on the right edge of the highlight.
7.4.1 Arrow selection method
> If is shown on the left and on the right next to the set value, you can alter this using
the left/right arrow keys.
7.4.2 Selection list
If is shown on the right next to the set value, the value is changed using the selection list.
19