TC-Helicon Voiceprism Manual - Manual (Page 39)

B-1
Appendix B: MIDI VoicePrism User Manual
APPENDIX B: MIDI
VOICEPRISM MIDI SPECIFICATIONS
Vibrato Depth parameter setting CC# 1 0-127 Scaling factor which is applied to the current
Vibrato Depth value. A value of 0 corresponds to a
scale factor of 0%, while a value of 127 corresponds
to a scale factor of 100%.
Detune parameter setting CC# 3 0-127 Scaling factor which is applied to the current
Detune Amount value.
Harmony Voice Level parameter setting CC# 12 0-127 Mapped to modifier
Lead Voice Level parameter setting CC# 13 0-127 Override same as harmony level
Effect 1 Level parameter setting CC# 14 0-127 Override as per other levels
Effect 2 Level parameter setting CC# 15 0-127 Override as per other levels
Scale Select parameter setting CC# 16 0-6 Selects library scale (0-5) or Custom scale (6).
Song Step Forward none CC# 17 0-63=off; 64-127 Forward 1 step
Song Step Backward none CC# 18 0-63=off; 64-127 Backward 1 step
Thickener Depth parameter setting CC# 19 0-50 Overrides Thickener intensity until program
change is received.
Vibrato Rate parameter setting CC# 20 0-127 Overrides Vibrato Rate until program change
is received.
Scale Mode Set Key On/Off off CC# 21 0-63=off; 64-127=on - Enables chord recognition
for Scale type and key: A major or minor chord
played in octave 1, 2, or 3 sets scale to Major or
Minor 1,2 and 3. A major or minor scale in any
other octave sets the scale to Custom.
Song Select CC# 22 0-49 = selects song number (if in song mode).
Damper Pedal off CC# 64 Harmony Hold. Damper message will sustain last
chord in before note off message.
Harmony Key / Scale select / Notes none Note Numbers Chords mode - notes would trigger chord recogni-
tion. Scalic mode - if Scale Mode Set key is on the
notes would trigger chord recognition for scale type
and keyNotes - trigger appropriate voices.
Pitch Bend 0 Pitch Bender User must be able to select range in MIDI Utilities
Window from +/- 0 to +/- 12 this is a Global control
Program Change Program Change 0-127
MIDI Channel parameter setting none 1-16 Global MIDI channel for all presets, CC's and
note information
Dump Program none none MIDI Utility Function
Dump Song none none MIDI Utility Function
Dump All none none MIDI Utility Function
Load Program none none Loads program into selected preset but does not
write it in until the user saves the preset.
Load Song none none Loads song into selected song but does not write it
until the user saves the song.
Load All none none MIDI Utility Function
Load OS none none MIDI Utility Function
Name Default Value MIDI Message(Default*) Range of Values