TC-Helicon Voiceprism Manual - Manual (Page 22)

VoicePrism User Manual
22
Mix: Main Mix, Voice Mix
MIX BUTTON
The menus under the mix button set the mix levels for the current preset. So if there
is a particular preset where you want to have the lead voice up close while the har-
monies sing in the background, you can set it here and save it in that preset. This is
a great way to set your levels if you intend to use the preset in
STEP mode. Like
every other change, your modifications will be lost unless you go through the STORE
function to save the altered preset.
MAIN MIX
This menu allows you to set the levels for the lead voice, the combined harmony
voices and the output from the effect blocks.
LEAD LEVEL
(Off, -30dB - 0db):sets the level of your lead voice.
HARMONY LEVEL
(Off, -30dB - 0dB): sets the level of your combined harmony voices.
EFFECT
1
LEVEL
(Off, -30dB - 0dB): sets level for effect block 1.
EFFECT
2
LEVEL
(Off, -30dB - 0dB): sets level for effect block 2.
VOICE MIX
This is where you can set levels for your individual harmony voices with the soft-
knobs. Click the softknob to set the voice On/Off. If the
VOICE
is
ON
, twisting the soft-
knob sets the
LEVEL
, ranging from
O FF
to
0 D B
. Be aware that
VOICE
ON / OFF
is different
from
LEVEL ON / OFF
, as a harmony voice set to
OFF
can still have a
LEVEL
assigned to it.
The little faces above each knob give a visual indicator of the voice’s gender charac-
teristics while the curved lines show relative loudness and panning.