TC-Helicon VoiceWorks Manual - Manual (Page 22)

20
SETUP PARAMETERS
V IB C ONTROL
Vibrato Control sets whether vibrato follows
the onset and attack of the model (Boost) or is
instantaneous (Manual). The Mod Wheel on
most keyboards controls the vibrato in both
modes, boosting the preset value in the Boost
setting and starting from a value of 0 in the
Manual setting for full manual control.
N OTES T RANS
Notes Mode Transpose. This transposes the
harmony voices in notes mode. The value
corresponds to octaves. This is useful when
used in conjunction with Keyboard Zone.
B END R ANGE
Sets in semitones the range that MIDI pitch
bend information will alter the pitch of the
harmonies in Notes mode.
N OTES 4C HAN
4 Channel Notes Mode.
Off: All harmony voices in Notes Mode will
respond to the base MIDI channel.
On: In Notes mode, Harmony Voice 1 responds
to the base MIDI channel; Harmony Voice
2 responds to the base MIDI channel +1
etc. All Harmony Voices will respond to
unique MIDI channels.
F OOTSWITCH 1-2-3
For fully functional footpedal control, use the
TC-Helicon Switch-3 foot pedal (other 3 button
footswitches may work also). Each button can
be assigned to one of the following functions:
None
Ignore this button.
SS+/- Increment/Decrement
Song Mode: inc/dec song step
Recall Mode: inc/dec current preset
Pressing increments (changes on
release). Holding for 2 seconds starts
decrementing.
SS+ Song Mode: Increment Song Step
Recall Mode: Increment current
preset.
SS- Song Mode: Decrement Song Step
Recall Mode: Decrement current
preset.
Byp Bypass
EffL Effect toggle mute - latched
EffM Effect toggle mute - momentary
I NPUT
Analog or Digital. Please note that selecting
Digital input will automatically change the
Sample Rate to external. The sample rate may
at that point be adjusted back to what is
desired.
G
LOBAL E FF
Global Effects. The effect settings from the
chosen preset become global for all recalled
presets.
T UNING
Sets the tuning reference based on A-440.
MIDI Parameters
M IDI C HANNEL
Sets the base MIDI Send and Receive
channel.
MIDI FILTER
VoiceWorks can be set to ignore MIDI data:
Prg
ignore program changes.
SX ignore system exclusive messages.
Prg+SX ignore program changes and system
exclusive messages.
CC C TRL
Selects the active CC control Map (refer to the
MIDI implementation section for details).
Advanced is for full CC control, GM-Basic is
for use with standard MIDI files and other
generic MIDI arranger products.
G LOBAL C HORD
On the last MIDI detected chord type and
root is retained when switching through
chordal presets.
Off the chord type and root is always taken
from the preset recalled.
S YSEX ID
This parameter sets the MIDI sysex ID for the
VoiceWorks.
K EYBOARD Z ONE
Sets the range of MIDI notes to be used for
notes and chordal mode harmony generation.
Incoming MIDI notes falling outside this range
will be ignored.
Example:
Above C4- tells VoiceWorks to respond to
notes above C4 only