TC-Helicon VoiceWorks Manual - Manual (Page 15)

13
Press any other key at any time during
previewing to return to the currently recalled
preset.
All 100 presets shipped with the VoiceWorks
can be modified or overwritten. You can
always restore a preset to its factory default
from the setup menu.
Edit
To edit preset parameters:
• Double click any one of the Voices &
Effects keys.
• Tab through the menu of parameters using
the ARROW KEYS. A flashing cursor will
appear over the data that you can edit using
the DATA WHEEL.
STORE
To store a preset:
• Press STORE.
• You can store to the current location, or you
can select a different location using the
DATA WHEEL.
• If you want to change the preset name, use
the ARROW KEYS to step through each
character of the name and use the DATA
WHEEL to edit each character.
• When you are ready, press STORE again to
store the preset to the chosen location and
name.
Presets Backup via MIDI
The VoiceWorks allows MIDI dumping of all or
individual presets, all or individual songs and
the VoiceWorks setup parameters.
• Connect the VoiceWorks MIDI Out to MIDI
In on either another VoiceWorks or an
external MIDI device.
• Enter the setup menu by pressing the
SETUP key and scroll to the MIDIDump
parameter.
• Select what you would like to backup using
the DATA wheel. Pn indicates a preset; Sm
indicates a song, and Setup indicates all
setup parameters.
• If connected to another VoiceWorks simply
press ENTER and your data will be copied
to the other VoiceWorks.
PRESET HANDLING
• If connected to a sequencer, arm it to record
SYSEX data and press ENTER on the
VoiceWorks.
The VoiceWorks is always ready to receive
MIDI System Exclusive Dumps.
Simply connect MIDI Out from the device you
are dumping from to the MIDI In on the
VoiceWorks and send the Sysex dump at any
time.