TC-Helicon MP-76 - Reference Manual - Manual (Page 9)

Using MP-76 with your VoiceLive Touch 2
MP-76 English Manual – 2015-01-20 7
Using MP-76 with your
VoiceLive Touch 2
Make sure your VoiceLive Touch 2 is running
the newest firmware version. Use VoiceSupport
software to update your device’s firmware. You
can download VoiceSupport here:
tc-helicon.com/products/voicesupport/
To enable Mic Control on VoiceLive Touch 2 for
your MP-76:
► Press SETUP.
► Navigate to the INPUT tab using the < or >
arrow buttons on the SliderFX bar.
► Select the INPUT parameter using the top left
button on the Matrix.
► Change the INPUT TYPE to MP-76 using the
SliderFX bar.
To select what your MP-76 buttons do:
► Press SETUP.
► Navigate to the MIC CONTROL tab using the
< or > arrow buttons.
► Select the UP button parameter using the
Matrix.
► Use the SliderFX bar to select the “target” for
the UP button.
(“Target” meaning: “What this button is sup-
posed to do”).
Some options have “Momentary” in the title.
“Momentary” means:
“To activate the feature, press and hold the
button.
To deactivate the feature, release the button”.
► Repeat this process for the other three mic
buttons (Left, Right, Down).
You’re done!