Effects - transducer, Effects - transducer 30, F transducer – TC-Helicon VoiceLivePlay GTX Details manual User Manual

Page 30

f transducer

Contains effects that modify the sound by adding various filters and overdrive compo-

nents
there are three parameters:

Drive –

Controls the amount of overdrive applied to the signal more drive will distort the signal

and create megaphone style effects

Filter –

Employs a filter that changes the sound of the Transducer to be “thinner” or more “muddy”

depending on the preset. Thinner filter settings sound more like a radio or walkie-talkie.

Style -

select the style menu by pressing the lower left soft button it will be the only one lit on the

left side of the LCd screen

there are 8 styles to choose from:

1 meGaphone
2 radio
3

on the phone

4 overdrive
5

BuZZ Cut

6 staCK
7 tweed
8 ComBo

Effects - Transducer

Advanced -

to enter the advanced menu, press and hold any of the lit BLue Led soft buttons

Routing -

applies the transducer sound to the selected audio

there are 2 settings:

output - applies the effect to the lead voice and any voices derived from it, like harmony or

doubling
2

fx - applies the effect only to voices within an effect for example, if you are using a delay, the

initial “tap” of the delay will be uneffected, but subsequent “taps” will have the transducer ef-

fect

Gate Threshold -

transducer effects are very prone to feedback via a p a the transducer block

has an independent gate that can be set to help alleviate feedback raising the threshold will cause the
effect to “kick in” at a higher input volume, which can help avoid feedback while you’re not singing

Gain -

Controls the overall level of the transducer effect