TC-Helicon VoiceTone Create XT Manual - Manual (Page 9)

Quick Start
9
EN
Step 7:
Carefully raise the gain and/or volume on your sound
system mic input channel and master volume until you
hear a good level from your vocals.
Step 8:
Initial setup and operation is shown below. After setting,
sing to hear Create XT’s factory effects.
Pedal
3
Hold for Tap Hold for Preset
Press until
LED lights up
Tap to light
On LED and
hear effects
a) Tap to switch A and B
settings in each preset
Tap to advance
through factory
presets 0-9
Stereo LED
should be off