TC-Helicon VoiceTone Create XT Manual - Manual (Page 16)

A “style” is a collection of factory settings that creates a
single composite effect. You can create a new sound by
selecting a style bank using the Style knob. You can get
further variations on that style by press and holding the
Tweak button. The style number will flash. Pressing the
tweak button will cycle through the style variations for
that bank. Press and hold tweak to go back to normal
operation.
Selecting Sounds In Performance;The Right
Method For You
Create XT has several ways of selecting effects from a
standing position using the footswitches. The difference
lies in how much you want to interact with the product
in performance:
1 1.. O On ne e ggrre eaatt sso ou un nd d::
Use the factory default sound of preset #1 in the A
position of the AB footswitch. With the Tone button
engaged, this would make a useful, high quality effect
you could use for an entire performance. Toggling
Getting To Know Create XT
16
Auditioning Create XT’s Presets
Press the Preset button to
advance to the next preset
number which will be
shown in the main display.
While on that preset, you
can tap the AB footswitch
to toggle between the two sound options in that preset.
The LED above the respective A or B legends shows
which is currently active.
Once you’ve tested each preset’s A and B setting, you’ve
heard the entire factory range of vocal effect presets.
What Is A Preset? What Is A Style?
A “preset” is a conveniently-accessed holding place for
one of the factory styles and any edited “Tweak” settings
that modify it. Each preset has two different settings, A
and B which can be toggled back and forth quickly in
performance. The A and B part are stored separately by
press and holding the Preset button.
3