SUUNTO Zoop - Manual (Page 81)

79
CAUTION When the battery is changed all nitrogen and oxygen uptake data
is lost. Therefore, the no-flying time shown by the computer should
have reached zero or you must wait for 48 hours or preferably even
100 hours between dives before you may dive again.
All history and profile data, as well as the altitude, personal and alarm settings, will
remain in the dive computer memory after the battery change. However, the clock
time and time alarm setting is lost. In the NITROX Mode the Nitrox settings are also
reverted back to default settings (21 % O
2
, 1.4 bar PO
2
).
When working with the battery compartment, cleanliness is extremely important. Even
the smallest dirt particles may cause a leakage when you dive.
BATTERY KIT
The battery kit includes a 3.0 V coin type lithium cell battery and a lubricated O-ring.
When handling the battery do not make contact with both of the poles at the same
time. Do not touch the surfaces of the battery with your bare fingers.
TOOLS REQUIRED
• A flat 1.5 mm screwdriver or a special tool for spring bars (K5857).
• Soft cloth for cleaning.
• Needlenose pliers or large screwdriver for turning securing ring.