SUUNTO Zoop - Manual (Page 8)

6
percentages to be understated and will affect decompression cal-
culations. If there is a desire to adjust the computer to provide more
conservative calculations, use the personal adjustment feature to
affect decompression calculations or reduce the PO
2
setting to affect
oxygen exposure according to the entered O
2
% and PO
2
values.
WARNING SET THE CORRECT ALTITUDE ADJUSTMENT MODE! When div-
ing at altitudes greater than 300 m [1000 ft], the Altitude Adjustment
feature must be correctly selected in order for the computer to cal-
culate the decompression status. The dive computer is not intended
for use at altitudes greater than 3000 m [10000 ft]. Failure to select
the correct Altitude Adjustment setting or diving above the maximum
altitude limit will result in erroneous dive and planning data.
WARNING SET THE CORRECT PERSONAL ADJUSTMENT MODE! Whenever
it is believed that factors that tend to increase the possibility of DCI
exist, it is recommended that you use this option to make the cal-
culations more conservative. Failure to select the correct Personal
Adjustment setting will result in erroneous dive and planning data.
WARNING DO NOT EXCEED THE MAXIMUM ASCENT RATE! Rapid ascents
increase the risk of injury. You should always make the Mandatory
and Recommended Safety Stops after you have exceeded the
maximum recommended ascent rate. If this Mandatory Safety Stop
is not completed the decompression model will penalize your next
dive(s).