Flying after diving – SUUNTO Zoop User Manual
Page 52

50
TABLE 3.3. WARNING SYMBOLS
Symbol on display
Indication
Diver Attention Symbol - Extend Surface Interval
Violated Decompression Ceiling
Do Not Fly Symbol
If you start a new dive with less than 5 minutes of surface interval time, the dive computer
interprets this as a continuation of the previous dive and the dives are considered to
be the same. The diving display will return, the dive number will remain unchanged,
and the dive time will begin where it left off. After 5 minutes on the surface, subsequent
dives are, by definition, repetitive. The dive counter displayed in the Planning Mode
will increment to the next higher number if another dive is made.
3.5.3. Flying After Diving
The no-flying time is shown in the center window next to the airplane image. Flying
or travelling to a higher altitude should be avoided at any time the computer counts
down the no-flying time.
NOTE
The airplane symbol is not shown on the stand-by display. You should
always activate the dive computer and check that the airplane symbol
is not displayed prior to flying.