Speed limits – SUUNTO T6 User Manual
Page 54
53
3.5.5. Speed limits
With this function you can set speed limits to alarm you when you go above or below
the limits. If speed limits are active, number
is displayed on the right hand side of
the SPD/DST mode display. Refer to chapter 4 for more information on speed limits.
To set speed limits:
1. In the Speed/Distance menu, scroll to Spd Lim and
press ENTER.
2. Press UP/DOWN to select On. Press ENTER.
3. Set the high speed limit with UP/DOWN and press
ENTER.
4. Set the low speed limit with UP/DOWN and press
ENTER.
NOTE: HR limits and speed limits cannot be used at the
same time. Suunto t6 alerts you according to the limits
activated last. Long pressing ENTER toggles between
the limits being On and Off.
NOTE: Speed limits can be set to alert in a range between 2.0 and 150.