SUUNTO T6 - Manual (Page 53)

52
3.5.4. Distance intervals
With this function you can set distance intervals for
interval training. After the stopwatch is started, the
Suunto t6 alerts and records lap times and other data
after every completed interval. If distance intervals are
active, number is displayed on the right hand side of
the SPD/DST mode display. Refer to chapter 4 for more
information on distance intervals.
To set distance intervals:
1.In the Speed/Distance menu, scroll to Interval and
press ENTER.
2.Press UP/DOWN to select On. Press ENTER.
3.Set the first interval with UP/DOWN and press ENTER.
4.Set the second interval and so on.
NOTE: Distance interval 1 can be set to alert in a range between 0.1 and 9.9. For dis-
tance interval 2 the range is between 0.0 and 9.9.
NOTE: After distance interval 1 has been completed, your Suunto t6 automatically
switches to distance interval 2. If distance interval 2 is set to zero, it goes back to dis-
tance interval 1.
NOTE: When a timer or Autolap is on, Suunto t6 stores information to the log accord-
ing to the settings that were valid when you activated the stopwatch. If you adjust the
settings after activating the stopwatch, Suunto t6 will still use the old settings. The
new settings will only come to effect after you reset the stopwatch and start it again.