SUUNTO T6 - Manual (Page 48)

47
single training session. They are set with the Suunto Training Manager PC software in
the t6 settings History tab of the Properties window.
To reset history information:
1. In the Training menu, scroll to History and press ENTER.
2. Select Reset. Your Suunto t6 displays the message ‘
RESET HISTORY ?’.
3. Press ENTER to confirm the history reset. Press ALT/BACK to return without
resetting the history.
3.4.7. Pair
With this function you can pair the Suunto t6 with the transmitter belt, a wireless
speed and distance sensor or both.
Transmitter belt
To pair the transmitter belt:
1. Remove the battery from the transmitter belt.
2. Short-circuit the - and + metal plates in the battery compartment by connecting
them with a metal instrument.
3. Select Pair in the Training menu of your Suunto t6.
4. Select Hr belt. The message ‘
TURN ON NEW DEVICE ’ is displayed.
5. Insert the battery in the battery compartment and wait for acknowledgement. Within
30 seconds either ‘ PAIRING COMPLETE ’, or, if pairing failed, ‘ NO DEVICES FOUND ’ is
displayed.
6. If pairing is successful, close the battery compartment cover. If pairing fails and no
devices can be found, remove the battery and repeat steps 2-6.
Removing the battery, short-circuiting the transmitter belt and putting the battery back
again activates the ID transmission of the transmitter belt.