SUUNTO D6I - Manual (Page 52)

2. In the next menu, a Code number is displayed. Clear the code by short-pressing
the UP button (toggle from “Ok” to “Clear”), and press the SELECT button.
3. Short-press the MODE button to exit the DIVE settings.
4. Take the Suunto D6i unit close to the transmitter (the system must be pressurized
to above 15bar/300 psi). The dive computer displays the received new code
number and then start displaying the transmitted cylinder pressure. The wireless
transmitter indicator (flash symbol) is displayed every time the Suunto D6i receives
a valid signal.
53