Sure Heat 2008 Amana AM33 Natural Gas Conversion Kit - Manual (Page 3)

AM33 LP-P Natural Gas Conversion Instructions
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Self-tapping
Screw
Fig. 5
Phillips Pan
Head Screws
9. Remove the self-tapping screw securing the left side
shelf in position. Loosen the four (4) hex head screws
on the left side of grill head assembly under the left side
shelf for approximate 0.5” . Then lift and take off the left
side shelf and set aside. (See Fig. 9)
8. Remove the self-tapping screw securing the right side
burner shelf in position. Loosen the four (4) hex head
screws on the right side of grill head assembly under the
side burner shelf for approximate 0.5” . Then lift and take
off the side burner shelf and set aside. (See Fig. 8)
5. Remove the two phillips pan head screws and two self
-tapping screws securing the side burner casting and the
small bracket in position. (See Fig. 5)
Self-tapping
Screws
6. Pull the side burner casting slightly to rear and angle it
up, then slide it into the hole on the side burner tray to
get the side burner valve orifice out of the side burner
casting. Remove it and set aside. (See Fig. 6)
7. Disconnect the flex line from the side burner valve
assembly. (See Fig. 7)
Side burner
valve assembly
Flex line
Hex head
screws
Hex head
screws
Self-tapping
Screw