Sure Heat 2008 Amana AM33 Natural Gas Conversion Kit - Manual (Page 2)

AM33 LP-P Natural Gas Conversion Instructions
Tools needed:
Phillips head screwdriver
3/4” wrench
1/4” wrench or socket
Adjustable wrench
Wear golves to be protected from the sharp edges of the interior parts. ▲ !
▲ !
WARNING
Be sure gas supply is off, the knobs are in the off
position and the grill is cool.
NOTE: Make sure to use supplied pipe sealant on all non-flared fittings.
1. To get started, remove all the control knobs and set
aside. (See Fig. 1)
2. Use a 3/4” wrench to disconnect the regulator & hose
assembly from the side burner valve. (See Fig. 2)
4. Remove the side burner griddle and side burner grate
(See Fig. 4)
Regulator hose
Fig. 1
Fig. 2
Fig. 3
Plastic nut
3. Disconnect the igniter wires underneath the side burner
shelf. Then unscrew the push button cap on the side
burner shelf control panel, take out the battery and
unscrew the plastic nut to remove igniter module. (See
Fig. 3)
Fig. 4
Push button cap
AA battery