Compaq OXYGEN VX1 - Manual (Page 7)

Overview 1-1
Chapter 1
Overview
1.1 Introduction
This chapter provides a brief overview of the 3Dlabs OXYGEN VX1 PCI graphics
controller.
1.2 Module Description
The 3Dlabs OXYGEN VX1 PCI graphics controller accelerator module is a single
expansion-slot, 32-bit PCI bus graphics option that provides 2D graphics acceleration for
supported Compaq systems. It is based on 3Dlabs’ GLINT P3 graphics chip.
Table 1–1 3Dlabs OXYGEN VX1 PCI Graphics Controller
Option Description
SN-PBXGF-AB 3Dlabs OXYGEN VX1 PCI graphics controller with 32 MB of SDRAM
memory
For up to date minimum operating system and firmware revision information supported for the 3Dlabs
OXYGEN VX1 PCI graphics controller, refer to the system QuickSpecs located at
http://www.compaq.com.