Compaq OXYGEN VX1 - Manual (Page 22)

3-8 3Dlabs OXYGEN VX1 PCI Graphics Controller Installation Guide
3.4.2 Matching X Server Primary Screen with VGA Console
PCI slots are not always probed by the system in the order of their slot
numbers. Because of this, the order of X server screens will not necessarily
correspond to the order of the slots in which the 3Dlabs OXYGEN VX1 PCI
graphics controllers reside. The X server command line option
-screenOrder
may be used to alter the mapping of physical screens to logical screens. In
particular, this can be useful if you desire the X server’s primary screen to
coincide with the VGA console.
3.5 Messages
Device driver messages are typically logged to /var/adm/messages on Tru64
UNIX systems. Should problems arise, this file should be checked for
informational messages; an example is shown here.
•
p3g: %dx%d cursor glyph truncated to hardware limits
The X Server attempted to use a cursor larger than the
64x64 limits of the hardware. Cursor glyph will be
displayed incorrectly. Application should be brought
into conformance with X11 expectations.