Compaq OXYGEN VX1 - Manual (Page 26)

4-4 3Dlabs OXYGEN VX1 PCI Graphics Controller Installation Guide
4.4 Default Graphics Settings
The default graphics resolution is 1024 x 768. The default refresh rate is 70 Hz
and the default color depth is 8 bits per pixel.
4.5 Determining Current Settings
To find the current settings under OpenVMS, issue the following two
commands, in order, at the DCL prompt:
$ @DECW$UTILS:DECW$DEFINE_UTILS
$ XDPYINFO
In addition, you can show the following logical names at the DCL prompt:
$ SHOW LOGICAL/SYSTEM DECW$SERVER PIXEL_DEPTH
$ SHOW LOGICAL/SYSTEM DECW$SERVER REFRESH_RATE
$ SHOW LOGICAL/TABLE=DECW$SERVER* *SIZE_IN_PIXELS
If any of these logicals is not defined, then the respective default is in effect (see
Section 4.4).
Alternatively, you can also view the following error log file to determine the
current settings:
$ TYPE SYS$MANAGER:DECW$SERVER_0_ERROR.LOG
4.6 Overriding Default Settings
To override any of the default settings, follow these steps:
1. Copy or rename the
SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.TEMPLATE file to
create a new command (.com) file called
DECW$PRIVATE_SERVER_SETUP.COM.
2. Now make the edits for the settings you want to change using a text editor,
and save the file.