Casio E MULTI PJ CAMERA Multifunctional Camera System - Manual (Page 68)

68
OTHER RECORDING FUNCTIONS
IMPORTANT!
• BESTSHOT user setups are located in the camera’s
built-in memory after the built-in sample scenes.
• When a BESTSHOT user setup is recalled, the
monitor screen in step 4 of the procedure on page 66
displays the text “Recall User Scene”.
• Note that formatting the built-in memory (page 132)
deletes all BESTSHOT user setups.
NOTES
• The following are the settings that are included in a
BESTSHOT user setup: focus mode, EV shift value,
white balance mode, flash mode, and ISO sensitivity.
• Note that images recorded with this camera only can
be used to create a BESTSHOT user setup.
• You can have up to 999 BESTSHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• User setups are assigned file names using the format
“UEXZ4nnn.jpe” (where n = 0 to 9).
■ To delete a BESTSHOT user setup
1. In the REC mode, press [MENU].
2. Select the “REC” tab, select “REC Mode”, and
then press [
̈].
3. Use [ ̆] and [̄] to select “ BESTSHOT”,
and then press [SET].
• This enters the BESTSHOT mode and displays a
sample scene.
4. Use [
̇] and [̈] to display the user setup you
want to delete.
5. Press [
̄] ( ) to delete the user setup.
• You can also delete a user setup by using your
computer to delete its file in the “SCENE” folder in
the camera’s built-in memory (page 147).