Casio E MULTI PJ CAMERA Multifunctional Camera System - Manual (Page 47)

47
BASIC IMAGE RECORDING
Digital Zoom
Digital zoom is activated after you reach the maximum
optical zoom factor (3X). It enlarges the part of the image
at the center of the image screen. The range of the digital
zoom factor is shown below.
Digital Zoom Factor Range: 3X to 12X
(in combination with optical
zoom)
1. In the REC mode, press [MENU].
2. Use [
̇] and [̈] to select the “REC” tab.
3. Use [
̆] and [̄] to select “Digital Zoom”, and
then press [
̈].
4. Select “On”, and then press [SET].
• Selecting “Off” disables digital zoom.
5. Hold down the
(Telephoto) zoom
button to increase the
optical zoom factor.
• When the digital zoom
factor reaches its
maximum value (3X), it
stops momentarily. Keep
the
(Telephoto)
zoom button depressed
and zoom will switch
over to digital zoom
automatically.
• Switching to digital zoom causes the zoom indicator
to appear on the monitor screen. The zoom indicator
shows the current approximate zoom factor.
6. Compose the image and then press the
shutter release button.
Zoom indicator
Digital zoom indicator
1X 3X 12X
Current zoom factor
Optical Zoom
Digital
Zoom